Pattern wall brick 1. Find the front before the shop The base layer should be cleaned before tiling. If there are lime plaster, latex paint, wallpaper and other decorative objects on the wall, or there are dirt on the ground, it must be cleaned, otherwise the cement mortar will not bond well with the base layer; in addition, if the wall itself If there are cracks, they should be properly treated before they can be tiling, so as to avoid the cracks or falling off of the wall bricks caused by the cracks in the basic structure in the future; and the wall surface of the cement should be napped, for the ground or wall with too much flatness or verticality difference. It is also necessary to use cement mortar for leveling. 2, the laying order is stressful The floor tiles should be affixed from the inside to the outside. If there is slope or floor drain on the ground, you should pay attention to the slope according to the drainage direction; the wall tiles should be laid from the bottom to the top. For the sake of beauty, the bottom brick should be attached. After the wall tiles are finished, press the floor tiles again. When there are half bricks, they should be placed below. In addition, one wall can not be attached to the top at a time, in case the tile has a large weight and causes collapse. 3, wall tiles should be fully soaked Wall tiles have a high moisture content and must be taken into account when pasting. The base layer before tiling should be fully watered and wet, and the tiles should be soaked in water for at least 20 minutes before use. Otherwise, the moisture in the mortar is quickly absorbed by the dried substrate and the tile, which will affect its adhesion fastness. Wall tiles also absorb moisture from the cement, making the cement unable to act as a patch. In addition, the water absorption rate of each brand of wall tiles is also different, which is based on experience.
AGLEX LED Grow Light Bar is mainly for marijuana. They with strong light and special spectrum for it, helping marijuana plants growing better and faster. There are 240w 320w 400w 600w and 700w LED Grow Light Bar available. Widely used in greenhouse, grow tent, plant factory, and home garden.
Key features:
1. Special spectrum LED Grow Light designed for cannabis. Cannabis love to under it.
2. Patent Foldable design, easy to install and could enlarge lighting area.
3. Dimming function. You could adjust lighting intensity as plants needs.
4. High efficiency, PPE 2.8 μmol/J. more lights absorbed by your plants, shorten growing cycle but with awesome harvests.
5. Efficient heat sink, great to length lifetime.
6. The lifespan is over 50000 hours, lower maintenance costs.
7. 3 years no-hassle warranty.
L700 displany:
Led Grow Light Full Spectrum,Led Grow Light,Best Led Grow Light,Led Grow Light Shenzhen Ameri Technology Co., Ltd. , https://www.aglexz.com
Main points of wall tiles