Gypsum line mold, do you know what kind of material? Our gypsum line molds are actually used in some places such as decoration, then I will introduce you to the gypsum line mold. The place, the types of our plaster line molds, the choice of plaster line molds, and how we should maintain the plaster line mold.

First, the type of plaster line mold

1, latex mold

If you are a brother who does plaster painting, especially plaster like white embryo wholesale, it is not suitable to use latex mold. Latex is usually a soft and hard mold, so it is often used to produce large-scale gypsum images, such as educational molds, medium and large garden landscape sculptures, etc.

2, rubber mold

The most commonly used mold for plaster painting, because of its low price, simple technical and practical effects of plaster making, and easy to demould, make it the most widely used in plaster painting and wholesale production of plaster. As long as it is avoided to expose it to sunlight, its service life can reach more than 1000 times. Because of the soft film, it is not suitable to manufacture a gypsum image that is too large, such as (60 cm or more).

3, plastic mold

It is mainly used for cartoon type, because it is fast in production, low in cost, and equal in strength, and is very popular among low-end users.

4, silicone mold

The deformation is extremely small, but the cost is high. It is usually used for imitation of commodities. The high temperature resistance of silica gel reaches 160 °C or even higher. The tear resistance of silica gel is not good, and it is simple and rotten.

Second, the gypsum line mold purchase method

1. The first is to look at the pattern pattern depth. The general pattern of the gypsum embossed decorative product pattern should be more than 10mm, and the production is fine; the second is to look at the surface finish, only the surface of the gypsum embossed decorative product with smooth surface and smooth feel is installed. There will be a good decorative effect.

2. If the surface is rough and not smooth, it will give people a sense of shoddyness after installing the paint; see the price level, compared with the price of the plaster relief product, the price of the inferior gypsum relief product is 1/3 to 1 cheaper. /2. Although this low price is attractive to users, it often reveals defects after installation and use, which is regrettable.

3. The plaster line mold must have residual gypsum residue after demoulding. The traditional wiping method is manual operation, which is costly and inefficient. The improved gypsum line production line is equipped with a dedicated plaster cleaner, which requires a plaster line to clean the brush roller.

Third, plaster line mold maintenance method

If you want to make the plaster line mold last for a long time, it is necessary to pay attention to the maintenance of the plaster line mold, to avoid the appearance of bad mold, etc. When curing, you must use hot water to heat the appearance, then apply the soybean oil on the outside and leave it for 24 hours. After each use, the plaster line mold should be cleaned and cleaned, placed in a ventilated place to be dried, and then stored in a cool and dry place. Do not expose to the sun.

Our friends have learned from the top of the article that there are several types of plaster molds for us. You can buy them, and some of our shopping skills for this plaster line mold will help everyone, then our Friends still want to know more about decoration, please pay attention to our decoration home network.

Other Light

Led Holiday Light,Outdoor Christmas Lights,Christmas Tree Lights,Led Christmas Lights

Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com