The first step in the renovation of a new house is the demolition of a house. If the room type is not satisfactory, then it must be to break the original spatial structure and create a pattern that you like. Then, in the process of dismantling some of the extra walls, there are some walls that are not just moving. If you do anything, you will be like Ms. Ye and you will have to work harder and harder.

The owner, Miss Ye, just renovated her apartment on the top floor last year. Her preference for the American style was specifically designed to allow designers to open up the original three-bedroom and two-room layout and turn it into a fully open flat. Hesitation changes need to be moved to the load-bearing structure. During the entire construction period, Ms. Ye was constantly complained by her neighbors. Not only did she require her to immediately stop work, but also a lot of load-bearing structures to repair the original damages. Under pressure, Ms. Ye could only temporarily revise her design. This would make her originally designated furniture and lighting unsuitable, or be replaced or reluctantly put back into the house. Looking at her home after her renovation, Ms. Ye not only felt that the effect was poor, but also calculated her own fines and rework expenses. There was a great sense of regret about stealing chickens.

Responses:

When planning a design plan, the owner should first consider the "feasibility." The so-called feasibility is not only whether the owner can accept and bear the burden in the price range, but also whether the house itself can carry such a design. Non-standard operations will not only bury potential safety hazards in the entire building, but some even cause many legal troubles.

The load-bearing walls in the space cannot be arbitrarily destroyed. Some decoration companies believe that "as long as they are reinforced several times more, the dismantling part does not matter." This is actually a very irregular and risky practice. Some of the decoration companies have their own advantages of "capable of securing property." They promised that if the owners would only allow them to construct, they could definitely get the property. But in reality, the owners would have to pay more "gray budget" to pay for their own risks. And the result is not necessarily as good as it was originally. The previous interviews had indeed encountered several owners who had demolished and changed the bearing walls. Although the final decoration works well, the ever-deteriorating relationship with the neighbours and the continuous disputes over the properties have caused us to see the long-term destruction of the bearing structure. Impact and ongoing risk. Therefore, the owner should not see that the case of “really good” after the individual damage to the load-bearing wall has blindly followed the trend and changed it casually. If you have always lived in a space that is risky and frightening, how can you call it comfortable?

When design needs, mobile bearing walls, especially the kitchen and bathroom walls must have several points: the most important is the kitchen bathroom leak-proof water, the foundation of the wall to do a good job, the bottom is usually to do about 750px high concrete beam As a water stop, in order to ensure that the line load on the floor of the apartment is not overloaded, the wall above the water stop should be constructed with lightweight bricks. Another point, many designers and construction workers are easy to ignore, the top of the new brick door security should be added a concrete lintel, some people used to use wooden beams, wood damp or dry easily deformed, there will be hidden dangers. The supervisors found more construction teams when checking the construction site. In order to cut corners and cut costs, they even smeared a layer of concrete outside the brick wall. The counterfeit “bridging beams” were needed for the owners to identify and judge themselves and prevent regrets. occur.

Four strokes learn to distinguish bearing walls

It does not mean that the renovation of the wall cannot be carried out in home decoration, but it is only a reminder that everyone needs to be cautious when renovating. The most crucial point in the renovation of the wall is that the bearing wall cannot be moved. How can we tell which wall is the load-bearing wall? We can distinguish it by the floor plan, by observing the structure of the building or by listening to sounds on the wall surface.

1, see the floor plan data

In the floor plan of the house, the walls marked with black on the drawing are load-bearing walls, and the walls marked with white parts are non-load-bearing walls. Such walls can be demolished and removed without affecting the building construction.

2, look at the structure of the house

In general, all walls of a brick-concrete structure are load-bearing walls. The external wall of a frame structure is a load-bearing wall, and the internal walls are generally not load-bearing walls.

3, see the grade of the house

General low-rise residential buildings, bungalows and villas are of brick-concrete structure, and their basic surfaces are load-bearing walls. The high-rise elevator buildings and western-style buildings are all frame structures.

4, see the thickness of the wall

Non-load-bearing walls are relatively thin, generally about 10 cm thick. A hand beat a beat, there is a crisp echo, is a light wall, and the thickness of the load-bearing wall is generally 240MM or more, there should not be too much sound upturned.

Decoration construction knowledge construction acceptance

European Hinges

European Hinges,European Door Hinges,Euro Style Hinges,European Style Hinges

Jiaxing Gates Hardware Products Co.,Ltd , https://www.jxgateshardware.com