1. Reasonably adjust the peak load during peak hours

Under normal circumstances, the load factor of the transformer should be controlled to about 60%, and the loss of the transformer is low. Therefore, during the peak power consumption period, the equipment operation plan should be optimized, and some relatively unimportant electromechanical loads and lighting loads should be removed to reduce the peak load.

2. Public lighting and office equipment operation management

In the case of not affecting the office, the illumination should be turned down as much as possible or the lamps should be turned off in time. There is no special need, and the decorative lamps should not be opened for a long time. For areas with less personnel flow, the luminaire control switch should adopt inductive, voice-activated, touch-delay-off and other control modes, and conditionally monitor the public lighting system in real time. Office equipment such as computers that are not used for a long time should be cut off in time to reduce standby loss.

3, air conditioning system operation management

In summer, the air conditioner set temperature value is lowered by 1 °C, which will increase the energy consumption by 9%. In winter, the set temperature will be increased by 1 °C, which will increase the energy consumption by 12%. Therefore, proper adjustment of the air conditioning set temperature value is an effective measure for air conditioning energy saving. At the same time, the equipment monitoring system is used to strengthen the operation and management of the air conditioning system unit equipment, and according to the system load change and meteorological environment, timely adjust the air conditioning system operation plan, reduce the total operating power of the equipment, and control the optimal start and stop time of the air conditioning equipment. Under the premise of ensuring the environment is comfortable, shorten the unnecessary running time of the air conditioner to achieve energy-saving operation.

4, elevator operation management

During low-peak operation, the elevator should be adjusted in time to stop the elevator and reduce the no-load or low-load operation of the elevator as much as possible. In the peak operation, each elevator can be reduced according to plan, or the staggered stop measures can be extended to shorten the elevator travel, shorten the operation cycle, and the running speed will be greatly improved, thereby improving its operating efficiency.

1PC Ball Valve

Cf8M Valve,1Pc Ball Valve,1 Pc Ball Valve,1Pc Flanged Ball Valve

Wenzhou Dico Valve Technology Co.,Ltd. , https://www.dicovalves.com