As the saying goes: "A cold autumn rains." After the autumn rain, the long, wet and cold winter is no longer far away, and the wall-hung boiler has to be put on the battle to become a weapon for the daily heating of the family. Can you give it a test before you use the fireplace? Through regular inspection, and in accordance with the three steps of “listeningâ€, “seeing†and “sensingâ€, it is possible to determine the operating conditions of the internal components of the boiler, and effectively find out the wear, aging, corrosion, etc. during use, so as to be targeted. The ground is repaired, and potential hazards of the wall-hung boiler are eliminated in time to ensure safe, efficient and reliable operation of the wall-hung boiler. Moreover, if the wall-hung boiler can be maintained regularly, the efficiency of the wall-hung boiler can be effectively improved, and the service life of the wall-hung boiler can be greatly prolonged. More furniture information is available at http:// Aluminum Sheet With RAL Colors Aluminium Panel Sheet,Aluminium Coated Sheet,Colored Aluminum Sheets,Decorative Aluminum Sheet SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyoto.com
Wall-hung boiler heating is a new type of heating method that uses clean energy for heating. With the advantages of comfort, convenience, energy saving, flexibility and flexibility, it has gradually become the main heating equipment on the market. However, as an imported product, the introduction of the fireplace to China is not long. As a result, domestic consumers are very concerned about the pre-purchase issues. In fact, they do not understand the daily management and maintenance. It is not enough to ignore the maintenance and inspection of the boiler. Odd.
The wall-hung boiler is a precision equipment containing water, electricity and gas systems. Among them, the waterway system includes independent heating systems and domestic hot water systems; the circuit system mainly refers to the strong electricity that provides power for fans, pumps, etc., and the weak electricity of control and safety, and the gas system includes gas supply, combustion and smoke. Emissions, etc. Such sophisticated equipment is only regularly maintained and maintained to ensure the safety and comfort of heating, just like the cars we drive.
Especially for wall-mounted boilers that have been used for more than two years, after many times and long periods of use, pumps, fans, main heat exchangers, etc. will have different degrees of wear and tear, and it is necessary to carry out regular maintenance and inspection. For the fan, the dust in the air and the carbon produced by the insufficient combustion of the gas are easy to adhere to the blade, which will cause the fan load to increase and the smoke to be exhausted. In serious cases, the boiler will have a fault code and stop working. It will even burn the fan. Similarly, the effect of long-term use on the pump is also obvious: impurities and scale in the water will deposit on the impeller and inner wall of the pump, resulting in insufficient pump output, affecting the heating effect, or the pump stuck. At the same time, the main heat exchanger and the burner will also have combustion impurities such as carbon deposits, which will affect the heat exchange efficiency and increase the gas consumption, and the main heat exchanger will be burnt. In addition, although the current mainstream wall-hung boilers have adopted more or less means and measures to prevent scaling, after long-term use of the wall-hung boiler, scale will adhere to the inner wall of the heat exchanger and the pipeline, resulting in heat exchange efficiency. Low, the water flow is reduced. If such a situation continues, there will be an increase in gas consumption, a deterioration in heating effect, and a sudden hot and cold hot water.
Don’t forget to check out a cold fireplace in autumn rain