Management and harvesting of celery in greenhouse

When celery is grown in the winter shed, the maximum temperature at noon should not exceed 25 °C. After the shed, the temperature will start to pass when the temperature is close to 20 °C in the morning, and the ventilation will stop when the temperature drops to 18 °C to 15 °C in the afternoon. The minimum temperature at night is 10-8 °C. During the severe winter season, the ventilation and ventilation time are gradually reduced. The daytime temperature is kept at 15-20 °C as much as possible, and 5-6 °C at night. Every 2 to 3 days, choose a sunny and warm weather to open a small slit in the shed to prevent the disease from occurring due to low temperature and high humidity. After the weather has warmed up, the amount of ventilation can be gradually increased, and watering and fertilization are properly applied according to the growth of celery.

During the cultivation of celery, in order to promote its growth, gibberellin can be sprayed on the leaves, and the obvious effect can be seen after 15 days. Spraying gibberellin combined with fertilizer management can achieve better results.

Celery can be harvested from 50 to 60 days after planting and 40 cm in length of petiole. Harvesting starts from about 5 cm from the base of the plant; the leaves are not excessive, and two to three functional leaves must be retained so that the growth does not affect the growth of the plants. In order to make the wound heal quickly, it is not possible to water immediately after the leaves. Generally, 2 to 3 leaves are taken before New Year's Day, and the second time can be harvested before the Spring Festival. After the Spring Festival, it is harvested until the whole plant is pulled up. After each sacral leaf, the shed temperature should be increased by about 5 °C to promote wound healing and root regeneration. After 5 to 7 days, the temperature should be restored to normal temperature, and watering and topdressing should be strengthened to prevent pests and diseases.

Total 1 | <First <Prev 1 Next> Last> |
share to:

Welding Screws

Projection Weld Screw,Weld Fasterner,Screw Weld,Weld Screws,Bottom Projection Weld Screw

Dongguan Tiloo Industrial Co., Ltd , https://www.sales-fastener.com