Do you know what the principle of smart switching is? The focus of this article is to introduce you. In recent years, the application of smart touch technology has been deeply rooted in people's minds. The rapid spread of intelligent home, hotel and office has prompted smart switches to replace traditional mechanical switches. Inevitably a trend. The single-line dual-control intelligent switch solution switch developed by Shenzhen Ada Electronics Co., Ltd. solves the technical problem of single-fire line power take-off and dual-link (dual control) touch function, and realizes multi-bit or multi-way switch mode.

Intelligent switch design principle and installation method

The intelligent switch adopts ultra-low power consumption design, the standard size is 86*86*43, light and beautiful, the standby current is only 220V 30uA (less than 0.001 watt), and the standby power consumption is less than 0.1 degree in the whole year, which is more than the loss of wires through the wall. The leakage current is still low. The working voltage is AC 170V~250V (50Hz~60Hz), the load power is 5W~1000W, the ambient temperature is -20~40 degrees, the single-pole double-throw switch is the same as the mechanical switch, with the function blue backlight indication, very rich Artistic beauty.

The product is easy to install, adopts standard 86 type wall switch exterior design, can be directly installed without connecting to zero live wire and rewiring, and can be connected with common loads such as fluorescent lamp, energy saving lamp, incandescent lamp, spotlight, LED lamp, low power motor motor and so on. The luminaire will automatically return to the off state after a power failure call.

This article will provide a single, dual and three-way switch installation method in conjunction with a specific application system.

Before installation, the power must be cut off, it is strictly prohibited to install with electricity, and it is installed by professionals. Open the box, take out the switch, use the screwdriver to reach into the notch of the lower end of the switch, and gently pull it up to release the panel.

The line must be connected in strict accordance with the following figure:

1. Single switch connection: L1 is the input end and L2 is the normally closed output end. L3 is the normally open output.

2. Two-way switch wiring: L1A is the input terminal of A, L2A is the normally closed output of A, L3A is the normally open output of A, L1B is the input of B, L2B is the normally closed output of B, L3B is The B-channel normally open output.

3. Three-way switch wiring: When the three-way switch becomes dual-control, it must be combined with single-channel or dual-way switch. The three-way switch must not be combined with the three-way switch to form a dual-control switch.

4. Connect the cable, fix the 86 junction box with screws, and fasten the panel. It is forbidden to connect the zero line and the fire line at the same time.

Before installation, ensure that the load and line are intact; if there is no blue background light, it means that the line is not connected, check the line; if the single switch is invalid, it means that one line is not connected; if both switches are invalid at the same time, the public line is not Connected, that is, the zero-fire line is not connected or the load is open; if the backlight is on but the touch does not work, you need to cut off the power and re-energize.

Single fire line touch intelligent switch, low power consumption, outstanding performance and cost-effective, no need to change the user's current line layout during installation, saving time and cost for users, stylish design and user-friendly, intelligent application must bring Give users an unparalleled and elegant experience.