According to engineering construction personnel, the current common practice is for the owner to select the bathtub first, and the construction personnel will know the size before renovating.

Bai Mei Nuo Bathroom     American standard bathroom     Becker bathroom cabinet

However, it is often the case that after the water circuit is reformed, the bathtub cannot be installed, probably due to inaccurate dimensional measurements. As the owner, should review the construction drawings and the actual size is consistent, in the measurement must also pay attention to the thickness of the tiles, these factors are taken into account in order to ensure smooth installation, under normal circumstances, the error within a few millimeters is not a problem, but A difference of more than a dozen centimeters definitely cannot be installed normally, and it can only be repeated.

The key factors for the measurement are the size of the upper and lower water and the spacing between the hot and cold water. The closer the location of the water outlet to the bathtub is, the higher the drainage efficiency is and the less likely it is to block. It should be reminded that if there is an elderly person in the family, it is not advisable to choose a bathtub with a high skirt. This is because it is not convenient for older people to enter or exit. In addition, a non-slip mat should be placed under the bathtub and a handle should be installed near the wall to prevent falls. inverted.

Bathroom building knowledge bathtub bathroom

Level Transmitter

The liquid level transmitter can convert the changes of various level parameters into analog signals, and transmit them to the control room remotely for centralized display, alarm or automatic control of secondary instruments or computers. Its good structure and installation method can be applied to the continuous detection of liquid level, material level or material level under special conditions such as high temperature, high pressure, strong corrosion, easy crystallization, anti-clogging, anti-cold junction, and solid powdery and granular materials. , can be widely used in detection and control in various industrial processes.

Liquid level transmitters can be applied to liquid Level Measurement and control in industrial sites, rural water supply and sewage treatment, petroleum, chemical industry, power plants, hydrological monitoring, reservoirs, dams, hydropower construction and other fields of liquid level measurement and control. Liquid level transmitters have input type, straight rod type, flange type, threaded type, inductive type, screw-in type, floating ball structure design, with anti-blocking type design, simple device, convenient use and strong interchangeability , The high-quality sensor has high sensitivity and fast response speed, accurately reflects the slight changes in the flow or static liquid level, and has high measurement accuracy.

Advantages of Level Transmitters

1. The device is simple, easy to use, and has strong interchangeability.

2. It is suitable for measuring the liquid level and interface of the liquid medium in the container. In addition to on-site instructions, it can also be equipped with remote transmitters, alarm switches, and complete detection functions.

3. The reading is intuitive and eye-catching, and the direction of the observation indicator can be changed according to the user's needs.

4. The measurement range is large, not limited by the height of the storage tank.

5. The indicating mechanism is completely isolated from the measured medium, with good sealing performance, high reliability and safe use.

6. Simple structure, convenient installation, convenient maintenance, corrosion resistance, no power supply, explosion-proof.

7. The high-quality sensor has high sensitivity and fast response speed, accurately reflects the slight changes of flowing or static liquid level, and has high measurement accuracy.

8. With intrinsically safe explosion-proof and isolated explosion-proof capabilities, it can be used in various dangerous places.

9. With anti-blocking design, it can realize the measurement of the liquid level of paste medium.

10.100% equal division scale, LED/LCD indicator head, very convenient to read on site.

11.4~20mA two-wire signal transmission, strong anti-interference ability and long transmission distance.

12. Exquisite and unique zero point, full scale, and nonlinear compensation ensure the accuracy and stability of the instrument within the range of operating conditions.

13. The Pressure Sensor directly senses the liquid level pressure and is not affected by the foaming and accumulation of the medium.

14. Wide range of tested media can be used, such as oil, water and paste, with certain anti-corrosion ability.

Classification of liquid level transmitters

1. Single flange liquid level transmitter

Single-flange liquid level transmitters have flat flanges and flange liquid level transmitters with insert barrels, both of which are suitable for single-flange liquid level transmitters that use the gravity of the medium to be measured to measure the height of the liquid level. For medium with high viscosity and easy crystallization, it is generally used in open containers or equipment installations.

2. Double flange liquid level transmitter

The double-flange liquid level transmitter is a Differential Pressure Transmitter, which provides a reliable measurement method to prevent the measured medium from directly contacting the isolation diaphragm of the transmitter. The main features are the need to isolate the high-temperature medium from the transmitter, the measurement medium has a corrosive effect on the sensitive components of the transmitter, the suspension liquid or high-viscosity medium, the measured medium solidifies or crystallizes due to changes in the environment or process temperature, and the measured medium is replaced It needs to be strictly purified to measure the first class. Double flange liquid level transmitter is mainly used in the measurement of liquid level in sealed pressure vessels.

3. Submersible liquid level transmitter

The submersible liquid level transmitter has rod type and arm type. Its principle is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert the static pressure into electricity. Signal. After temperature compensation and linear correction, it is converted into 4~20mA current signal output. Due to the characteristics of this transmitter, such as convenient installation, strong adaptability, etc., it can perform high-precision measurement from water, oil to paste with high viscosity, and is not affected by the foaming and accumulation of the measured medium. It is generally used in open Devices for mouthpieces or equipment.

Level Transmitter,Differential Pressure Level Transmitter,Submersible Level Transmitter,Level Gauge

Wuxi Winsun Automation Instrument Co., Ltd , https://www.jswxwinsun.com