Plastic blind ditch construction method




Precautions during the loading and unloading process of round plastic blind ditch and during construction



The circular plastic blind ditch, also known as the composite geotechnical drain pipe, is a three-dimensional porous drainage material structure formed by the hot melt of the modified synthetic resin to form a frame. The outer layer is covered with a layer of permeable geotextile, and the muddy water is filtered by the outer geotextile. The clear water enters the circular plastic blind ditch tube and is discharged.



Transportation handling and storage: during transportation and loading and unloading. It is necessary to take it lightly, do not throw it, avoid mixing and mixing with sharp objects, avoid violent impact, wear flat rubber shoes when unloading the car, lift two people, two people in the car to lightly step on, the two are slow in the car Slowly splicing, smooth and lightly placed on the ground, the product should not be stored in the open air, and should avoid long-term exposure and heavy pressure of sunlight. Keep away from heat sources greater than 15cm and cover the tarpaulin when storing.



Construction: After excavating the curved trough according to the design, the bottom of the canal should be cleaned and leveled, and then the fine sand or powdered soil should be backfilled for 15cm. Then the two people lift the blind ditch and gently place it in the channel. The two butt joints are used to cover the geotextile. When turning the joint, use a hacksaw to cut the groove at one end of the joint at both ends into a 45-degree angle to form a 90-degree cross-section space, and then put the geotextile on the joint and then backfill the finer 75cm or more. Sand or dust, gently spread, avoid using machinery and equipment compaction, to avoid blind ditch directly contact with gravel, carefully laid to avoid rough construction.



To sum up the above points, we can achieve fine, civilized, safe, scientific construction, achieve a good drainage effect, and meet engineering requirements.



Alcohol Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Alcohol Mass Flow Meter, Alcohol Mass Flowmeter, Alcohol Coriolis Meter, Mass Flow Meter Alcohol, Coriolis Mass Meter Alcohol, ATEX, IECEx & CE approved.

Sealand meter is designed and produced according to world`s latest Coriolis technology with better appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.

Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.

Alcohol Mass Flow Meter, Alcohol Mass Flowmeter, Alcohol Coriolis Meter, Mass Flow Meter Alcohol, Coriolis Mass Meter Alcohol

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com