Construction Installation Renovation Steps Renovation Budget How To Make House Renovation How To Apply Folding Pocket Knife,Small Folding Pocket Knife,Foldable Pocket Knife,Army Pocket Knife YangJiang Junxiong Trading & Industry Company Co.,Ltd , https://www.cn-sundo.com
[Router introduction]
A router is a device that connects LANs and WANs in the Internet. It automatically selects and sets routes based on the conditions of the channel, and sends signals in the forward and backward sequence according to the best path. The router is the hub of the Internet, "traffic police." Currently, routers have been widely used in various industries, and products of various grades have become the main force for achieving various backbone network internal connections, backbone network interconnections, and interconnection between backbone networks and the Internet. The main difference between a router and a switch is that the switch occurs in the second layer of the OSI reference model (data link layer), and the routing occurs in the third layer, the network layer. This difference determines that routing and switches need to use different control information in the process of moving information, so the two ways to achieve their respective functions are different.
[How to install the router]
1. First connect your computer and router to the network. The connection method connects the ADSL cat's outgoing cable to your router's WAN port. The remaining LAN port can connect to your computer or switch. 
2. Then set your IP address to 192.168.1.254, subnet mask 255.255.255.0, all the way to determine, ipconfig (enter at the command prompt) to confirm that your IP address has become 192.168.1.254.
3. Then open Internet Explorer, enter 192.168.1.1 in the address bar and press Enter. The screen prompts for the user name and password, fill in the router's default user name and password (I use the router user name and password are admin, other routers can refer to the manual)
4. After the progress, a setup wizard will pop up. If it doesn't pop up, it doesn't matter. Click "Setting Wizard" in the navigation tree on the left, and the welcome message appears on the right. Click "Next".
5. Select "ADSL Virtual Dial (PPPoE)" and click Next.
6. Enter the user name and password, which is the username and password you use when dialing using ADSL 7. Click Finish.
8. Click "Network Parameters" -> "WAN Port Settings" in the navigation pane on the left
9. Select "Automatic Connection" and click "Save"
In this case, the broadband connection part is already set up. You can click on “Run Status†in the navigation pane on the left, and then click to view the status of the WAN port in the right window. If a "disconnect" button appears (do not click oh), the connection is OK. 
10. After changing the TCP/IP settings of all computers to automatically obtain the IP address, you can restart the Internet.
Xiao Bian epilogue: The above describes how to install the router , I hope to be helpful to everyone. For more relevant knowledge, please continue to pay attention to this website information platform. Follow-up will present more exciting content for everyone.
How to install the router router installation steps explain
One role of the router is to connect different networks, and the other is to select the line of information transmission. Choosing a smooth and fast approach can greatly increase the communication speed, reduce the network system communication load, save network system resources, and improve the network system's smooth rate, so that the network system can play a greater benefit. How to install the router ? We together look.