Telephone lines, network lines, cable TV lines, and audio lines are called weak wires. With the intelligentization of family life, the presupposition of weak current lines cannot be ignored. In the home decoration, the following points should be noted for the layout of telephone lines, network lines and cable TV lines:

Reserve enough jacks:

Taking into account the development and needs of family life, the general living room and each bedroom should be reserved for 1~2 telephone lines, network cables and cable TV jacks, and they should be distributed on different walls to facilitate the placement of electrical appliances. The change. The bathroom and kitchen can also be considered as needed to reserve a telephone jack. The restaurant can also consider whether to reserve a pre-TV cable jack for TV viewing during meals.

Centralized control:

With the advent of the network and information age, it is common for a family to install two phones or multiple computers to access the Internet. To ensure the quality of the docking of various lines and to facilitate maintenance, it is best to use the telephone line and network cable at home. Design a centralized control unit. According to the location of the network cable entering the room, select a certain place such as the entrance hall, the aisle, the study room, etc., design a small wire box (shaped like a power distribution box), and all the external incoming telephone lines, network lines, cable TV lines Arriving at this box, at the same time, the telephone jack, network jack, and cable jack of each room in the room must also reach the box, which can be connected in the box according to family needs. In order to ensure the signal quality, a TV signal multi-way branch adapter is needed in the online box. If there are multiple computers in the home, you need to have a network hub (the above two accessories stores are available for sale, the price is not high).

Avoid strong wires:

The weak electric signal is a low-voltage electric signal, and the anti-interference performance is poor, so the weak electric wire should avoid the strong electric wire (power supply line). The national standard stipulates that the horizontal distance between the power cord and socket and the TV line and socket should not be less than 50 cm.

Pay attention to moisture:

The lower edge of the socket is preferably about 30 cm from the ground. Generally speaking, these weak wires are often routed under the roof or under the floor, so in order to prevent moisture and easy to replace, the outside of these wires should be attached with a strong casing, and check whether the wire is broken or shorted before adding the casing. .

PH-B-L2

Phlizon`s COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.

Best full Specturm designed to perfectly match large areas of indooor plants, especially for Medical Plant.

COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.

1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.

Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.

1000w 2000w 3000w 400w led grow light Features

Indoor grow light

COB series, high power branded CREE COB with high Par value and deeper penetration

VEG/BLOOM and STRONGER switches for each grow stage.

Special spectrum for plant growing to increase the yield.

Building to Harvest: Beneficial for seeding to fruiting stage.

Good quality fans with low noise.

Easy to install by minute

Energy Saving, environmental friendly

3 Years Warranty

Compare led grow light to traditional HPS/MH grow light

WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?

1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.

2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.

3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.

Detailed images of 1000w cob led grow light

PH-B-L2,Led Grow Light Cob,1000W Cob Grow Light Indoor,1000W Led Grow Light,320W Cob Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com