(1) Energy saving. The electronic ballast of the fluorescent lamp is used to supply the lamp with a frequency of 20-60 khz, so that the luminous efficiency of the lamp is increased by about 10% than that of the power frequency (by a length of 4 feet), and the power consumption is low, so that the total of the lamp The input power is reduced by about 20%, which has better energy saving effect.

Electronic ballast

(2) Eliminate stroboscopic light and make the light more stable. It is beneficial to improve visual resolution and improve efficacy; reduce visual fatigue in continuous operation and help to protect eyesight.

(3) The starting point is more reliable. After starting the lamp, the starting point is successful and avoids multiple starting points.

(4) High power factor. Fluorescent lamps above 25W that meet national standards have a power factor higher than 0.95. However, it should be noted that the national standard specifies a high harmonic limit for lamps below 25W, so that its power factor drops to 0.7-0.8.

(5) Stable input power and output luminous flux: High-quality products have good voltage regulation performance. When the power supply and voltage deviation are large, the light source can maintain constant power and stabilize the illumination, which is conducive to energy saving.

(6) Extend the life of the lamp. The constant power of the high-quality products and the decrease in the lamp current, as well as the reliability of the starting point, can extend the life of the lamp.

(7) Low noise. High-quality electronic ballasts can reach noises below 35db, and people can't feel the noise.

(8) It can be dimmed. For places where dimming is required, such as the original dimming of incandescent or tungsten halogen lamps, high-efficiency fluorescent lamps with dimmable electronic ballasts can be used to achieve large-scale dimming from 2% to 100%.

It should be noted that only the well-designed electronic ballast can exert the above advantages. Although they are all electronic ballasts, electronic ballasts for metal halide lamps are much more complicated or almost completely different than those used for fluorescent lamps. If the design or manufacturing process is not in place, a very small omission will cause a malfunction.

Lathe And Milling Processing Parts

Lathe and milling processing parts refer to precision metal parts that are manufactured using lathe and milling machines. These machines use computer numerical control (CNC) to produce parts to exacting specifications with high accuracy and precision.

Lathe machines are used to produce parts that have a cylindrical shape, while milling machines are used to produce parts with complex shapes and irregular surfaces. The combination of these two machining processes allows for the creation of parts with different shapes, sizes, and complexities.

Lathe and milling processing parts are used in a wide range of industries, including aerospace, automotive, electronics, and medical. These parts are typically produced from a variety of metals, including steel, aluminum, brass, and copper.

The advantages of lathe and milling processing parts are their high accuracy and precision. The CNC machines used in their production are programmed to make precise cuts and movements, resulting in parts that are consistent and accurate. This is especially beneficial in industries where quality control is essential for safety and reliability.

Another benefit of lathe and milling processing parts is their versatility. The combination of the two machining processes allows for the creation of a wide range of parts with complex shapes and irregular surfaces. These parts can also be produced in large quantities, allowing for efficient mass production.

Lathe and milling processing parts provide a cost-effective solution for many manufacturing needs. The precision of these machines means that parts can be manufactured to exact specifications, minimizing the need for additional processing or finishing. This can result in significant cost savings for manufacturers and ultimately lower prices for consumers.

In conclusion, lathe and milling processing parts are essential components in the manufacturing industry. These precision parts provide accuracy, versatility, and cost-effectiveness for a wide range of applications. With the ability to produce parts with high accuracy and precision, lathe and milling processing parts offer a powerful solution for many manufacturing needs.

Turning And Milling Operations,Lathe And Milling Machining Parts,Custom Lathe And Milling Parts,Pricision Lathe And Milling Parts

Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lzautoindust.com