Electric sweeper buzzing brush does not turn how is it?

In the electric sweeper, whether it is a hand-push sweeper or a drive sweeper, it will not work properly because it will inevitably fail due to frequent use. Then Xiaomei of the Hemei cleaning equipment manufacturer said that electricity

Sweep sweeping car brush does not turn how is it?
1. If the brush of the electric sweeper is not turning because the brushing motor has malfunctioned, we must check and maintain it.
2. Whether the electric sweeper brush switch is in the open position, check whether the switch on the Hemei Sweeper control panel is open.
3, sweeping car battery exhausted, need to recharge.
4. If the motor of the electric sweeping vehicle is overheated or the motor is overloaded, then the sweeper motor switch needs to be turned off and then used for cooling for 45 minutes.
5, sweeping car power wiring or overheating protection are connected, if not need to connect.
6. The motor gear box of the sweeping vehicle is damaged, the gear box needs to be replaced, the motor of the washing machine is damaged, the Hemei sweeping motor and the motor fuse need to be replaced. Replace the fuse after finding the reason.
Service Hotline

Non Slip Mats

Welcome to visit us, we are the factory of Non Slip Floor Mats producer from China, this series made of pvc and widely used for the runners of wet area, like swim pools and vegetable supermarket, also contain chemcial lab or workshop. General of four size mm and Max 8.0mm for customized orders.

3.5mm Disposable
4.5mm General type
5.0mm High quality
6.0mm Higher quality
8.0mm Customized

Non Slip Mats,Indoor Floor Mat Non Slip,Non Slip Flooring Mats,Stay Put Non Slip Matting,Anti Slip Bath Mats

Jiangyin Yining E-Commerce Co., Ltd , https://www.jypvcmatyining.com