Copper Based Manganin Alloy Wire 6J13 for Resistor
Posted on

Model NO.: 6J13
Origin: Shanghai, China
HS Code: 7408290000
Model NO.: 6J13
Origin: Shanghai, China
HS Code: 7408290000
Copper Based Manganin Alloy Wire 6J13 for Resistor                                          

Manganin is a trademarked name for an alloy of typically 86%copper, 12%manganese, and 2%nickel.

Manganin strip and wire is used in the manufactur of resistor, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.

Manganin is also used in gauges for studies of high-pressure shock waves (such as those generated from the detonation of explosives) because it has low strain sensitivity but high hydrostatic pressure sensitivity

Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~3 11~13 0.5(max) micro Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.47±0.03ohm mm2/m
Density 8.44 g/cm3
Thermal Conductivity -3~+20KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC -2~+2α×10-6/ºC(Class0)
-2~+2α×10-6/ºC(Class1)
-2~+2α×10-6/ºC(Class2)
Melting Point 1450ºC
Tensile Strength(Hard) 635 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 340~535
Elongation 15%(min)
EMF vs Cu, μV/ºC (0~100ºC) 1
Micrographic Structure  austenite
Magnetic Property non
Micrographic Structure Ferrite
Magnetic Property Magnetic
 
Application of Manganin
Manganin foil and wire is used in the manufacture of resistor, Particularly ammeter shunt, because of its virtually zero temperature coefficient of resistance value and long term stability.
   
The data provided in this document is protected under applicable laws, including but not limited to copyright law and international agreements

Product size
Wire: 0.018mm-10mm
Ribbon: 0.05*0.2mm-2.0*6.0mm
Strip: 0.5*5.0mm-5.0*250mm
Bar: 10-100mm

 Copper Based Manganin Alloy Wire 6J13 for Resistor
Copper Based Manganin Alloy Wire 6J13 for Resistor
Copper Based Manganin Alloy Wire 6J13 for Resistor Copper Based Manganin Alloy Wire 6J13 for Resistor                                          

Manganin is a trademarked name for an alloy of typically 86%copper, 12%manganese, and 2%nickel.

Manganin strip and wire is used in the manufactur of resistor, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability.

Manganin is also used in gauges for studies of high-pressure shock waves (such as those generated from the detonation of explosives) because it has low strain sensitivity but high hydrostatic pressure sensitivity

Chemical Content, %
Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~3 11~13 0.5(max) micro Bal - ND ND ND ND
 
Mechanical Properties
Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.47±0.03ohm mm2/m
Density 8.44 g/cm3
Thermal Conductivity -3~+20KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC -2~+2α×10-6/ºC(Class0)
-2~+2α×10-6/ºC(Class1)
-2~+2α×10-6/ºC(Class2)
Melting Point 1450ºC
Tensile Strength(Hard) 635 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 340~535
Elongation 15%(min)
EMF vs Cu, μV/ºC (0~100ºC) 1
Micrographic Structure  austenite
Magnetic Property non
Micrographic Structure Ferrite
Magnetic Property Magnetic
 
Application of Manganin
Manganin foil and wire is used in the manufacture of resistor, Particularly ammeter shunt, because of its virtually zero temperature coefficient of resistance value and long term stability.
   
The data provided in this document is protected under applicable laws, including but not limited to copyright law and international agreements

Product size
Wire: 0.018mm-10mm
Ribbon: 0.05*0.2mm-2.0*6.0mm
Strip: 0.5*5.0mm-5.0*250mm
Bar: 10-100mm

 Copper Based Manganin Alloy Wire 6J13 for Resistor
Copper Based Manganin Alloy Wire 6J13 for Resistor
Copper Based Manganin Alloy Wire 6J13 for Resistor

Hyundai Hydraulic Parts

Hydraulic Piston Pump, Duplex Pump, Short-Stroke Pump, Noise/Vibration Reduction, High Self-Priming Ability, Rotational Stability, High Efficiency, High Pressure, Compact Size, Reduction of Overall Length.

Hyundai Hydraulic Main Pump,Hyundai Main Hydraulic Pump,Hyundai Hydraulic Pump,Hyundai Hydraulic Pump Spare Parts,Hyundai Hydraulic Main Pump Assembly,Hyundai Main Pump,Hyundai Pump,Hyundai Hydraulic Parts,Hyundai Excavator Parts.

We export GENUINE PUMP, OEM PUMP, AFTERMARKET PUMP. We are specialized in OEM PUMP & AFTERMARKET PUMP. We export 95 NATIONS. Please contact us If you need STABLE SUPPLIER.

Hyundai Hydraulic Main Pump,Hyundai Main Hydraulic Pump,Hyundai Hydraulic Pump,Hyundai Hydraulic Pump Spare Parts,Hyundai Hydraulic Main Pump Assembly,Hyundai Main Pump,Hyundai Pump,Hyundai Hydraulic Parts,Hyundai Excavator Parts

Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.jhexcavator.com