Flap Disc
Flap disc, commonly known as flat emery
cloth wheels, emery discs, flower impellers or elastic grinding discs, are a
large variety of coated abrasive conversion products, which press the cut
coated abrasive sheets one by one. It is formed by sticking adhesive to the
back cover plate along the circumference. The flap disc are called strong
elastic grinding discs. They are made of calcined emery cloth, which uses mesh,
nylon, plastic, steel paper and other materials as the base. Attached abrasive
tools, evenly distributed in a fan shape to ensure the best grinding effect.
The particle size is 36#-320#, 60# and 80# are the most common, and the outer diameter
is 4"-7" installed on the angle grinder. Angle grinders are mainly
installed on hand-held Power Tools to polish and polish welds, burrs, chamfers,
surface rust removal, and surface polishing of various metal and non-metal
parts.
The flat emery cloth wheel (flap wheel) is
formed by sticking multiple emery cloth sheets on the tray in a fan-shaped
superimposed arrangement, and the bonding angle between each emery cloth and
the tray plane is 10°-30°. The emery cloth arrangement of the utility model can
make When the abrasive cloth wheel grinds and polishes the workpiece to be
processed, the cutting angle is optimized to ensure that the base material of
the abrasive cloth wheel and the grinding are consumed simultaneously, which
obviously improves the overall wear resistance and grinding efficiency of the
flat abrasive cloth wheel, and prolongs the service life of the abrasive cloth
wheel. Grind the surface of metallic and non-metallic materials.
product advantages:
Compared with the resin grinding wheel for
fixed abrasives, it has the advantages of polishing and polishing at one time,
shortening the operation time, saving the grinding cost, high efficiency, good
heat dissipation, high grinding efficiency, reducing operator fatigue,
increasing machine life, etc. It has strong elasticity, High tensile and
bending strength and good grinding effect. The grinding speed is fast, the
effect is good, and the noise during grinding is low. It is suitable for
various industries or fields of manufacturing such as major metal parts
factories and machinery factories. Good weather resistance, salt spray
resistance and heat resistance, suitable for use in different regions.
Scope of application:
It is suitable for polishing of stainless
steel, metal, metallurgy, automobile, wood, marble and other industries. It is
especially suitable for the processing of stainless steel and can replace the
resin-shaped grinding wheel. It has strong elasticity, high tensile and bending
strength, good self-sharpening, high grinding rate, and low noise. It is
suitable for welding seams in the box. Polishing of the edges.
There are different classifications of
louvers according to different angles. The following are two common
classifications:
According to the appearance: T27 VS T29
Flap disc generally have two shapes, curved
and flat.
The flap disc type is also called the T27
type, and the curved type generally refers to the T29 type.
The flap disc type (T27) has a flat
surface. It is mainly used to polish the flat surface and the external edges
and corners. The flap disc and the workpiece are angled during work, which can
complete the grinding and polishing at one time, reducing the work flow.
The curved surface of the curved louver
(T29) has an upward arc, which makes the T29 flap disc have a better cutting
ability on the plane. When working, the T29 type grinding wheel forms an angle
of 15° to 25° with the grinding surface, which is mainly used to deal with the
grinding of contours and edges. When there are higher requirements for speed
and cutting ability, T29 flap disc is undoubtedly the best choice.
The related abrasive products we can supply is Flap Disc Adhesive, bonded abrasives, and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
According to the type of abrasive
particles: ceramic alumina VS zirconium corundum VS alumina
According to the type of abrasive selected,
the flap disc can be divided into three types: ceramic alumina, zirconium
corundum and alumina.
Because ceramic alumina itself has many
crystals, it has good self-sharpening, relatively neat edges, good heat dissipation,
and long service life. Therefore, ceramic alumina louvers are mainly used for
the grinding of stainless steel, aluminum and other hard metals.
Zirconium corundum itself is a
polycrystalline crystal, with fast cutting speed, good self-sharpening, and strong
resistance to high pressure and high temperature. Therefore, zirconium corundum
louver blades have strong cutting ability and long service life.
Alumina: single crystal, the cutting ability begins to
decline at the beginning of grinding, and the abrasive grains are not easy to
break, so the alumina flap disc is suitable for the processing of common
metals.
Flap Disc,Flap Disc Machine,flap disk 4.5,Polishing Flap Disc,Sandpaper Flap Wheel Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com
The campus's technical reserves are relatively rich and widely used. To a certain extent, it has promoted the entry of network such as EPON and ATM into the campus security monitoring system. EPON is a shared medium transmission method using wavelength division multiplexing technology. In the large-scale high-definition monitoring system, the application scheme and technology are mature and the cost is relatively moderate. ATM is a transmission method using asynchronous time division multiplexing technology, and uses fixed cells for data processing, coupled with high cost under high bandwidth requirements, and is not suitable for data transmission in which video signals change in real time. Therefore, adopting the EPON method is currently the more mainstream networking mode.
2. Application system construction cost Campus monitoring system, which plays a very important role as the pioneering infrastructure of “digital campus†and “smart campusâ€. To this end, we can adopt the staged construction method to monitor the unified planning and phased construction of the points. Each application system adopts the platform as the design principle and adopts the capability addition method to realize the unified integration of resources and the integration and reuse of the application capabilities to achieve the system. The cost of construction is minimally controlled.
3. The special nature of the construction mode of the enterprise BOT, etc., determines that the system construction is quite different from other government functional departments. The BOT construction mode is adopted, and the annual line lease and point rental method can greatly reduce the campus once. Sexual cost investment provides resource reserves and technical reserves for the follow-up construction of campus systems.
In recent years, Zhongxing Liwei has continuously introduced new security products. Which security products are launched for the education industry? Are these products designed and functionally adjusted for the business needs and characteristics of the education industry?
With many years of experience in security monitoring industry, Zhongxing Liwei actively constructs a modern security technology prevention system, vigorously promotes and perfects the campus security center with the headquarters of the education authority as the hub, and the school as the main body of human defense, physical defense and technical defense. The prevention and control system provides a comprehensive security protection service for teachers and students. Based on the in-depth understanding of campus security monitoring, ZXCSS ZTE Security Campus Monitoring System Solution was developed to provide a new and intuitive security management tool for colleges, primary and secondary schools, kindergarten security personnel and education management departments. Effective monitoring tools and management resources. This solution can be tailored to specific application sizes based on different school sizes and security management features. In design, in addition to video surveillance, primary and secondary schools can increase campus electronic patrols, automatic alarm systems, electronic patrols and other systems. In the universities and colleges, the automatic meter reading system can be added to automatically monitor the hydropower on the campus.
Campus security needs to consider three main points
[ Huaqiang Security Network News ] Specifically, campus security needs to be considered in the following aspects: 1. Basic network construction cost The campus system has the problem of integration and integration of the basic network construction and the existing network. At the same time, it is also necessary to consider the integration of the future application system. Therefore, in the infrastructure construction, it is necessary to consider the optimization of the existing system. The core equipment is upgraded to realize the construction of the campus monitoring network.