It is suitable for tensile, compression, bending, shearing and other tests of metal materials and components. It can also be used for the testing of similar tests for non-metallic materials such as plastics, concrete and cement. Towel Shelf,Barhroom Towel Shelf,Villa Bathroom Towel Rack,Towel Shelf Rose Gold Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com
First, the balance wing hydraulic universal tensile testing machine oil change notice:
1. Is the cylinder of the test machine top-mounted or cylinder-mounted?
2. Is the equipment controlled by a microcomputer (eg HY (WE) series computer controlled hydraulic universal testing machine)?
3. Is it the reading of a digital display screen (such as the HY (WE) series digital display hydraulic universal testing machine?
4, the digital display is generally similar to the computer's oil source.
5, if the tension machine control system is to read the disk (that is, the value is called the dial type by the dial degree) then change the oil trouble point;
6, the oil source can not move.
7. One oil drain on the side of the oil source, find a container with a short point;
8. Put it a little bit, pay attention to the position of the weight and the internal things behind the oil source.
9, if it is under the type, then it is simple.
10, put oil: the pipe does not move anything;
11. There is an oil drain port behind the fuel tank to raise the control cabinet of the tensile testing machine;
12. Open the oil drain and drain the oil; pay attention to the computer cable when lifting the control cabinet;
13, if it is not convenient, you need to remove the pipe, line and the like, do not mark before the demolition;
14. Avoid the situation of incorrect wiring.
Second, come on:
1. Put the control cabinet down to the original position, if the pipe is removed;
2, first connect the pipe and then refuel, there is a fuel filler on the fuel tank;
3, because there is a filter inside, so the refueling speed will be very slow;
4. If you add oil, you can remove the filter.
HY (WE) series hydraulic universal testing machine parameters:
Model specifications: 300, 600, 1000KN
Indication accuracy: ±1%
Relative resolution: ≤0.5%
Compressed space: 650mm
Stretching space: 650mm
Round sample clamping diameter: Φ10-60mm
Flat specimen clamping diameter: 0-40mm
Piston stroke: 200mm250mm
Maximum distance of bending fulcrum: 900mm
Shear sample diameter: Φ0-30mm
Size mm: 640 × 550 × 18001060 × 760 × 2400
Motor power phase: 1.5KW, 2.25KW, 3 phase
Weight: 1200 or 6600kg
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
When is the Hengyi Hydraulic Universal Tensile Tester suitable for oil change?