What is the size standard for the shower room? Shower room minimum size introduction

In the renovation process of the new house, the size of the shower room is a problem that needs to be taken seriously. What kind of size standard is adopted for the installation of the shower room requires careful consideration. The following decoration home decoration network Xiaobian will introduce the size standard of the shower room and the minimum size of various types of shower room, I hope to help you!


方形淋浴房尺寸


Shower room size standard:

1, the width of the shower room: this must have enough free space to rotate, to ensure that it will not receive the glass, the standard of decoration is 900mm * 900mm, if the body is full, you can change it to 1100mm * 1100mm on this basis, if it is The limitation of the bathroom space can be made small, but not less than 800mm*800mm.

2, the height of the shower room: usually the height of the ceiling is 2400mm, so the height of the shower room is mostly 1800mm~2000mm. It can also be adjusted according to the height of the family and the actual space. It also needs to pay attention to the position of the shower. It is too low to splash outward. Too high to hinder the appearance and affect the breathability.

3, the distance from the heating equipment: for the convenience of winter bathing, everyone will install a heater or Yuba bathroom, if it is hanging equipment, it is best not to be placed in the shower room or near the shower room glass to prevent damp. If it is hanging on the top, it depends on the size of the bathroom. In a small space, the heating equipment is placed in the middle. It does not have to be placed in the shower area. If the space is large, you can put it in the middle of the shower area. Try not to face the shower, shower room glass, otherwise it will not achieve good heating effect, but also easily lead to product aging or self-explosion.


扇形淋浴房尺寸


4, the distance from other sanitary ware: bathroom is often placed compact, there will always be a bathtub, toilet, bathroom cabinet, there should be a spacing of about 100mm, otherwise easy to use when interacting with each other, increasing the possibility of self-explosion.

  Shower room minimum size:

Minimum size of fan-shaped shower room

The general size of the fan-shaped shower room for adults is 900*900mm, but it can be smaller, but it is 800*800mm if the minimum size of the fan-shaped shower room can be achieved without considering the comfort. It will be impossible to use it if you are younger.

Minimum size of square shower room

The beauty of the square shower room is that it looks luxurious and generous, thick and steady, and it is also a good choice to install such a "generous" square shower room when space permits. The size of the square shower room is generally 800*1000mm, 900*1000mm, 1000*1000mm. Because the size of the square shower room can be customized according to the customer's needs, there is a reference in the size, but There is no such thing as fixing it.


钻石型淋浴房尺寸


Minimum size of diamond shower enclosure

The diamond-shaped shower room is half the size of a regular hexagon and looks more irregular. It is also named because of this. However, the name of the diamond-shaped shower room is really gorgeous. I will look forward to it before I see the diamond-shaped shower room. I will not be disappointed after seeing it. The size of the diamond shower room is 900*900mm, 900*1200mm, 1000*1000mm, 1200*1200mm, and the smallest is 900*900mm.

I hope that everyone will see the decoration of the decoration home small series for the introduction of the size of the shower room , can make a reference for your home decoration. If you want to know more about other aspects, please always pay attention to our decoration encyclopedia!

Pulley

A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable. The supporting shells are called blocks.

A pulley may also be called a sheave or drum and may have a groove or grooves between two flanges around its circumference. The drive element of a pulley system can be a rope, cable, belt, or chain that runs over the pulley inside the groove or grooves.

QFAP has specialized in producing various kinds of pulleys more than 10 years, could help to design or produce the pulley according to your requirements. (OEM accepted)

pulley-1



Materials: Ductile iron, Grey iron, Steel Castings, Aluminum

Surface treatment: Painting, Powder coating, zinc plating, hard anodizing, only oiled

Main of our customers is from USA, CANADA, AUSTRALIA and German

Belt Pulley,Timing Pulley,Rope Pulley,Nylon Cable Pulley

SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com