The LED tubes emergency kit is making your LED tubes into Emergency Mode, ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc. Emergency Led Tube,Led Tubes Emergency,Led Tubes Emergency Kit,led tube light with battery Foshan Nai An Lighting Electric Co.,ltd , https://www.naipslighting.com
Hole-eye topdressing method Use a raft, 20 to 30 cm away from the main root of sweet potato, hit a hole about 30 cm deep, apply the appropriate amount of ternary compound fertilizer, and seal it with wet soil. If you use a hole on each side of the ridge to topdress, the effect is better. This method can increase production by about 20% per mu.
When the sweet potato is inflated and cracks appear on the ground, use 500 kg of potassium dihydrogen phosphate per acre to add 400 kg of water, or use 2.5 kg of urea and 10 kg of superphosphate, add 500 kg of water, and mix with fertilizer to grout, each strain Irrigation is 0.7 to 1 kg. After 15 days, the supernatant of 100 kg of ash and 500 kg of water (soaked for 4 hours) was used to grout the cracks. After the irrigation, the cracks were sealed with soil. This method can increase the yield per mu by more than 300 kg.
Foliar topdressing method Foliar spray 0.3% potassium dihydrogen phosphate solution, spray once every 7 days. This method can increase production by 18% to 20% per mu.
Three methods to chase the sweet potato
14181 three methods to chase the sweet potato and expand the fertilizer 2008-9-21
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】