Anti-smashing shoes are also called steel-headed shoes. Although they are called differently, they belong to the same type of protective shoes. They are used to protect toe-type protective shoes. When the anti-smash shoes are designed and processed, the front of the shoes has impact resistance. The material can prevent the operator from falling and hurting the foot when wearing the work. Therefore, it is very important to say that the impact resistance of the anti-smashing shoes is measured. How to detect the impact resistance of the anti-smashing shoes?

Anti-hit shoes impact resistance test mainly uses safety shoes impact tester. The test methods are as follows:

1. The operator can be operated only after trained by professional technicians.

2. Connect the correct power supply and check whether the safety hook of the safety shoe impact tester is working.

3. Place the test-use clay on the center axis of the prepared steel toe cap;

4. Place the test toe cap on the chassis of the impact tester and secure it with a special holding device;

5. After the sample is installed, open the safety hook;

6. Adjust the stroke switch of the tester so that the impact head of the safety shoe impact tester slowly rises to the required test height;

7. Press the test button so that the impact head falls freely on the steel head shoe;

8. Press the DOWN button to lower the lifting plate until it reaches the impact head.

9. Take out the test clay in the steel head shoes and measure its height. This value is the small gap at the time of impact.

There are many types of safety shoes that have the same foot protection as anti-smashing shoes. They are used in different workplaces to protect the toe from piercing, compression, insulation, anti-static, acid and alkali, and cold resistance. , non-slip, heat-resistant, anti-cutting and so on.