Peach Shape Post,Garden Wire Mesh,Welded Garden Fence Panels,Curved Welded Wire Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com
Stainless steel drain automatic pressurizer working principle: When the condensate recovery device liquid through the inlet check valve, under the action of gravity into the pump, so that the float rises. When the float floats up to its upper limit position, the gas supply valve opens and vapor or compressed air enters the pump body, thereby gradually establishing pressure in the pump until it reaches a state sufficient to overcome the back pressure. The pressurized liquid pushes the outlet check valve. , start to discharge liquid. When the float descends to its lower limit position, the supply valve closes, cuts off steam or compressed air, and at the same time opens the exhaust valve, the pressure in the pump decreases. Steam condensate recovery system features: energy conservation and environmental protection, reduce operating costs, high degree of automation, applicable to different working conditions, energy saving and environmental protection, improve environmental quality, prevent cavitation, equipment and pipeline life is longer, the whole machine, easy installation, Adaptable.
Source: Shanghai Bojie Valve Co., Ltd.
Steam condensate recovery device optimization and application principle
Steam condensate recovery means can be widely used in the paper, chemical, food, pharmaceutical, grain and oil processing, rubber, metallurgy, building materials, machinery, cotton spinning, dyeing, and other wood industry, industrial enterprises steam condensate heating system closed Recycling can also be used for the steam condensate recovery in hotels, hospitals and civil buildings. It can conveniently and effectively change the condensate produced by the steam indirect heat exchange system to closed-end recovery. It is the update of the conventional traditional open recovery condensate tank. Replacement product. The condensate recovery device is a new type of condensate delivery device, which is simple in structure, does not require power from the motor, starts and stops automatically, operates reliably, and is easy to use and maintain. Compared with the conventional pump-powered condensate recovery device, the operation cost is low, and it has a good energy-saving effect, which is worth promoting.