Smart Locker Common Faults and Solutions
Posted on

The smart locker is a common storage facility. It has a wide range of applications and plays a very important role in our lives. It can help us to store some things that are not easy to carry, allowing us to free our hands and take care of ourselves. The investment into the things they want to do, but we also know that there is a small problem with electronic products, that is, many small faults, today Xiao Bian came to tell you about common failures and solutions of smart lockers.
Usually there are three kinds of common failures in smart lockers
First: There is nothing in the cabinet, but it cannot be used.
This is usually a software issue, which is often referred to as clear code. This is usually the user loses the bar code or forgets the password when using the smart locker, and then the administrator uses the management password to open and forget the code. As a result, this is a very good solution. You only need to use the management password to clear the corresponding cabinet number. However, it must be noted that it must be clearly seen, because if the clear code is cleared to another door, then it will be Cause other doors cannot be opened normally.
Smart lockers

Second: The barcode cannot be identified.
This situation we need to analyze, the first analysis is not a question of the bar code, whether the bar code is incomplete or has been blurred, if not ruled out, then there may be a problem with the bar code gun, this time it is necessary to analyze the line leads to The problem is still the problem of bar code gun damage. After step by step, we can find the root of the problem. If it is a line problem, then we can finish the line. If it is a hardware problem, then we can purchase new hardware.
Third: Can't close the door
Usually this problem is a problem with the clip. The reason why the door can be automatically ejected and closed is that this clip has a relation. It can spring the door automatically by using the spring. When it is closed, it only needs to be pressed. Yes, but once a problem occurs in the clip, either it cannot be opened or it cannot be closed, so when this happens in our smart lockers, we should promptly contact the maintenance personnel to replace the clip.

CAT Parts

Caterpillar has common rail diesel injection system, HEUI injection system and EUI injection system.

Parts for CAT common rail system including nozzle, control valve etc.

Parts for CAT HEUI injection systemi are mainly for C7 C9 C3126B injector and HEUI actuation pump. In details, including solenoid, nozzle, control valve, shim, repair kit etc.


There is favorable China made parts and original Caterpillar available.

Each part has undergone strict quality inspection and is properly packaged to ensure safe transportation.

Cat Parts,Injector Control Valve,Cat Engine Parts,Cat Spares

CHENGDU UNICO MACHINERY CO., LTD , https://www.injectortestbench.com