The house with windows is bright and transparent. Xiao Bian likes to have a particularly large window in the room. It is well ventilated, and when he wakes up, he can see the sun. It is simply fantastic. Today's windows generally have two kinds of sliding windows and windows. Which one is better and more suitable for home improvement? How to maintain it after installation? Let's take a look.

First, sash window and peace of the window which is good

1, sliding window

There are two kinds of push-pull windows: left and right, push-pull, and push-pull. It has the advantages of not occupying indoor space, beautiful appearance, economical price, good sealing, etc. It is connected by high-grade slide rails. It does not require effort, and the window sash is more stressed and not easily damaged. It is simple in structure and suitable for use in high-rise buildings with more than two floors.

However, the ventilation of the sliding window is limited. Only half of the windows can be opened. When closed, it is not closed enough. There are gaps and the energy consumption is relatively high.

2. Casement window

There are two kinds of side-opening windows and hanging windows. It is hinged with the window frame and turned on. It has a simple structure and can be fully opened. It has a large area, good sealing, and sound insulation, thermal insulation and resistance. Permeability, and ease of scrubbing, safety and security are good.

It is more space, space is limited, it is not recommended to install, and its small window, narrow vision, open outside the wall, easy to damage, and willing to leak, in general, flat window than sliding window performance is good, Generally used in office buildings, commercial and residential buildings, high-end residential and villas and other high-end buildings.

Second, how to daily maintenance after installation

1. After the doors and windows are installed, the protective film on the top must be torn off. If it is not cleaned in time, the adhesive residue of the protective film is difficult to clean;

2. If it is a casement window, it needs to be closed in a windy weather, otherwise it is easily damaged;

3, Pingkai window handle can not hang heavy things;

4, open the top of the hanging window is more complicated to open, so we must understand the operation after use;

5, push-pull windows should always clean the push-pull track, if there are hard particles in the track slot, it will damage the windows or not tight;

6. When the push-pull window is pushed and pulled, the force point should be in the middle or lower position of the window sash. When pushing and pulling, do not use too much force so as not to reduce the service life of the sash.

7. The sash fan on the window sash should also be cleaned frequently. You can remove the fixed sliver and remove the stencil with a water-soluble detergent.

8. When using the sash fan in the sliding window, please pay attention to coincide with the vertical frame of the inner rail push-pull fan so as to maintain a good seal.

Editor's Note: The above is about sliding window and peace window selection which is good and how to install the routine maintenance after the introduction, whether it is sliding window or casement window are their own characteristics, we have to choose according to their own home to install The maintenance after installation is also very important.

Hvlp Paint Spray Gun

The HVLP Electric Paint Spray Gun make painting and varnishing much easier, with 30000 rpm speed,18Kpa working pressure.

Hvlp Paint Spray Gun,Cordless Paint Spray Gun,Electric Paint Sprayer,Airless Paint Gun

Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com