First, welding gas cutting "10 not welding, cutting"

1, no special operating certificate, no welding, cutting.
2. There are no reliable safety measures for rainy days and open-air operations. No welding or cutting is required.
3. Containers that have been loaded with flammable, explosive and hazardous materials have not been thoroughly cleaned, have not been tested for combustible concentrations, and are not soldered or cut.
4. Work in the container without 12 V low voltage lighting and poor ventilation, no welding, cutting.
5. There is no power failure in the equipment, the equipment is not depressurized, no welding or cutting.
6. There are flammable and explosive materials around the work area that have not been eliminated, and are not welded or cut.
7, the nature of the welding body is not clear, Mars flies to unknown, not welding, cutting.
8, equipment safety accessories incomplete or invalid, not welding, cutting.
9. There is no special person monitoring, no protective measures, no welding or cutting in boilers, containers and other equipment.
10. No security measures have been taken in the fire-fighting area, no fire procedures have been implemented, and welding and cutting have not been carried out.

Second, lifting operations "ten do not hang"

1. The command signal is unknown or the command is not suspended;
2, overload does not hang;
3, the workpiece is not firmly fastened;
4. Someone above the hanging object does not hang;
5, the safety device does not hang;
6, the workpiece buried in the ground does not hang;
7, the light can not see clearly or not;
8, oblique pull the workpiece does not hang;
9, angular objects without measures do not hang;
10. The ladle is too full.

Third, electrical safety is not allowed

1. An unlicensed electrician is not allowed to install electrical equipment.
2. No one is allowed to play with electrical equipment and switches.
3. Do not use insulation-damaged electrical equipment.
4. Do not use electric heating equipment and light bulbs for heating.
5. No one is allowed to start the electrical equipment with a warning sign and unplugging the fuse.
6. Do not flush or rub the electrical equipment with water.
7. When the fuse is blown, it is not allowed to change the fuse whose capacity does not match.
8. Do not practise any procedures to piling and driving in places where cables are buried.
9. When someone has an electric shock, cut off the power immediately and do not allow them to touch the electric shocker before leaving the power supply.
10, Do not touch the arrester and lightning rod when lightning

IV. Ten Probation

1, suffering from high blood pressure, heart disease, anemia, epilepsy, deep myopia and other diseases are not allowed to climb;
2. No one is allowed to elevate without supervision;
3, no helmets, belts, or trousers are not allowed to climb;
4. There are more than six winds and heavy rain, heavy snow, and heavy fog on the job site.
5, scaffolding, springboard is not allowed to climb
6, no anti-skid ladder measures, did not wear non-slip shoes are not allowed to climb
7. Do not climb the derrick, gantry, scaffolding, can not take the non-human vertical transport equipment to ascend
8, carry bulky objects are not allowed to climb
9, no high-voltage lines are not allowed to climb
10, lack of light is not allowed to ascend

V. Ten inaccuracies at the construction site

1, do not wear a safety helmet, are not allowed to enter the scene.
2, after drinking and with children are not allowed to enter the scene.
3, derricks and other vertical transport are not allowed to take people.
4, are not allowed to wear slippers, high heels and hard-soled shoes to work.
5, template and perishable materials are not allowed to be used as scaffolding, and no tying is allowed during operation.
6, the power switch can not be used more than one brake. Untrained workers are not allowed to operate machinery.
7, no protective measures are not allowed to work at heights.
8. Lifting equipment is not allowed to be lifted without inspection (or trial hoisting). The following stations are not allowed.
9. Smoking is not permitted at the woodworking sites and fire-prevention areas.
10. The materials for construction at the construction site should be stacked neatly and be civilized.

Sixth, personal safety "10 not allowed"

1. Do not start operations without proper protection.
2. Do not wear safety helmets, safety belts, safety nets, or protective clothing.
3. Do not set up scaffolding without putting on a stable ladder stool.
4. It is forbidden to carry heavy equipment and materials for climbing operations.
5. Do not excavate foundation pits or trenches without safety slopes or solid walls.
6. Do not use mechanical (electrical) equipment that is not equipped with safety devices.
7. Persons who have not obtained the certificate are not allowed to work in special types of work.
8. It is forbidden to drive or walk in the heart or pillow wood.
9. Do not sit, cool, rest, shelter from the rain, and drill on rails, sleepers or cars.
10, Do not look forward to crossing the line, adhere to the "one stop, two look, three passes," is strictly prohibited overtaking the stock market.

VII. Ten bans on fire and explosion protection

1. It is forbidden to smoke and carry fires and flammable, explosive and easily corroded articles in the production plant.
2. It is forbidden to go through the fire procedures in accordance with regulations and it is forbidden to use fire in the production plant area.
3. It is forbidden to wear clothes that easily generate static electricity to enter the oil and gas area.
4. It is forbidden to wear shoes with iron nails to enter the oil and gas area and work in flammable and explosive areas.
5. It is forbidden to scrub the equipment and the ground with gasoline, volatile solvent oil, etc.
6. All kinds of motor vehicles that have not been approved shall be prohibited from entering the production plant area, tank area, and flammable and explosive areas.
7. It is forbidden to discharge flammable and explosive materials and hazardous chemicals on site.
8, is strictly prohibited in the oil and gas area with ferrous metal or easy to spark tools hit.
9. It is forbidden to block the fire exits and to arbitrarily use the fire facilities or damage the fire facilities.
10. It is strictly prohibited to damage all kinds of explosion-proof facilities in the factory area.
(The ten bans are not "neither" nor "no" but they are also collected.)

Eight, household appliances fire ten not

1. Don't unscrew the wires.
2, do not use copper, aluminum, wire instead of fuse.
3. Do not use high-power electrical equipment at the same time.
4, do not leave the electric iron after going to do other things to cause oblivion.
5. Do not store flammable liquids in the refrigerator.
6. Do not use plastic tapes or other medical tapes instead of insulating cloths.
7, do not wait for a long time in the standby state.
8. Do not open or close exhaust fans or lamps when gas leaks are found.
9. Do not wash gasoline-soaked clothes in the washing machine.
10, do not let the door light rain.

This article is a reprint of the online media and represents only the author's point of view. It has nothing to do with the China Labor Insurance Network. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.