The outer surface of the metal film resistor is coated with a blue or red or green protective lacquer. The outer surface of the metal film resistor is coated with a blue or red or green protective lacquer. automatic mixers,touch less faucet mixer,automatic faucet,touch less mixer taps Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.com
Characteristics
1 heat resistance is good, usually the working temperature is 70 ° C, the maximum working temperature can reach 155 ° C.
2 The voltage stability is good and the temperature coefficient is small.
3 The working frequency range is wide, the noise electromotive force is very small, and it is also freely used in the high frequency circuit.
4 Under the same power conditions, the metal film resistor has a smaller volume advantage than the carbon film resistor, which is about half of the carbon film resistor.
5 It can be precisely adjusted by the cutting thread method with an accuracy of ±0.5% and ±0.05%.
6 resistance range is very wide. Metal film resistors have a strong resistance range with precise resistance and small error range. It can be made into a resistor of 1Ω-10OOMΩ.
8 pulse load stability is poor, not as good as carbon film resistors. Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Pingshang Technology Xiaobian takes you to know the characteristics of metal film resistors