【Personal protection】Fire gloves storage, use, maintenance and decommissioning

News Related Keywords: No tags.

Firefighter gloves - warehousing

Fire gloves

(a) Unused fire gloves should pay attention to the following matters:

1 , can be stored according to the state of the factory packaging, should be placed on a wooden board or shelf to avoid moisture;

2. At least once every six months to open the package inspection, and ventilation, dumping processing, drying when necessary, to prevent moisture, mildew and insects and other phenomena;

3 , when stored, avoid contact with hard, sharp objects to prevent scratch damage;

4 , storage time should not exceed four years.

(b) Used fire gloves should pay attention to the following matters:

1. Used fire gloves are generally not stored anymore, and they need to be stored after cleaning and drying;

2. Perform inspections every quarter to see if there are any phenomena such as moisture, mildew, insects, etc.;

3 , storage time should not exceed one year.

Firefighter gloves - use

(a) Daily storage of fire fighting gloves on duty The fire fighting gloves should be placed in a ventilated and dry place.

(b) Fire gloves shall not be used for the disposal of radioactive substances, biological poisons and dangerous chemicals.

(3) Fire-fighting gloves shall be used in conjunction with personal protective equipment such as firemen's protective clothing for fire fighting, fire helmets and fire- fighting fire-fighting boots , and pay attention to the following matters:

1. When the fire fighting glove is worn, the glove mouth and the fire protection protective clothing cuff should be partially overlapped;

2. Wear the glove fastening device before putting on the fire gloves into the fire.

3 , pay attention to avoid direct contact with the flame or high-temperature hot objects in the fire.

Fireman's Gloves - Maintenance

(a) Fire gloves should always be kept clean and dry.

(b) Fire gloves can be washed as follows:

1. Fire-fighting gloves must not be washed with a washing machine, but a small amount of neutral detergent can be used for cleaning.

2. Heavy stains can be smeared with dry-cleaning agent, gently rubbed and rinsed with water.

(3) Fire-fighting and rescue shall not use fire-fighting gloves that have not been fully dried after cleaning.

Fireman's Gloves - Inspection and Maintenance

(1) The firefighters shall conduct an inspection every day on the duty fire gloves they use, including:

1. Is the multilayer structure complete and damaged?

2 、Whether the zipper, buckle, reflective label band is in good condition;

3. For the first time use, check whether there is a permanent label “Fire Gloves Comply with GA7-2004 Standard”.

(b) The fire squadron should organize a weekly inspection of the fire fighting gloves on duty, including:

1. Is there any damage?

2. Is there any residue or chemical residue that cannot be easily removed?

3 , zipper, nylon buckle is damaged;

4. Is the line of the outer layer off the line?

5 , reflective tape is complete.

Fireman's Gloves - Retired

Fire gloves should be decommissioned in one of the following situations:

(a) on duty for one year;

(2) The damage of the inner (outer) layer affects the use;

(3) Contaminated with blood and poisonous and harmful substances;

(d) other must be retired.

The information in this article comes from the Internet and was reorganized and edited by China Rescue Equipment Network.

Full Power Emergency Battery Pack

The Full power emergency pack is ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc.

Emergency Lighting Battery Pack,Emergency Battery Pack For Led Lights,Emergency Power Packs,Bodine Battery Pack,led battery backup ballast

Foshan Nai An Lighting Electric Co.,ltd , https://www.naipsled.com