Cleaning procedure In daily cleaning, use a vacuum cleaner to clean it, then clean it with a soft cloth dampened with a special detergent or soap. For large area cleaning, it can be done with a sprayer or a rotary cleaner. For natural lacquered solid wood flooring, water is not good for it. Minimize excess moisture when cleaning. Wring the rag when scrubbing. The oil wax solid wood floor should be removed from the black rubber and other stains that cannot be removed with water can be removed with a soft cloth, low concentration alcohol or a little white wine. Maintenance program Natural lacquered wood flooring: After the floor is clean, a diluted floor polish should be applied. If the floor usage rate is relatively frequent, the concentration of the polish can be appropriately increased. In general, the living room can be maintained once a month, while the kitchen, living room, etc., which are frequently accessed, need to be maintained weekly. Oil wax wood floor: completely clean the floor and keep it dry, then apply a thin layer of light oil wax on the floor surface, polish the floor with a soft cloth and wipe off the excess oil to avoid bright spots. Do not rush to use the floor covered with light oil wax, it should be air dried at night. Antifouling program Natural lacquered wood flooring: The local board becomes difficult to clean due to a lot of fouling. It can be mixed with degreaser and warm water at 25 °C. The floor should be thoroughly cleaned before using the degreaser. For floors that are too dirty, the surface of the solid wood floor should be polished and then repainted, but this method should be used as a last resort, because the sanding will inevitably make the floor thinner. Oil wax wood flooring: If there is a large area of ​​stain on the floor, it can be treated with a sanding machine equipped with a dry soft polishing pad to maintain the same gloss, but it must be carried out within 4 hours by applying light oil wax on the floor surface. Then let the floor dry naturally for 16-24 hours. AS2129 Flanges are Australian Standard. There are Table C/D, Table E, Table F and Table H. AS2129 Flanges,Table Flanges,Table D Flanges,Table E Flanges Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.zhongnuoflanges.com
Floor care: seven points of beauty