The order of wear resistance in the floor is: the laminate flooring is similar to the cork flooring, and the bamboo flooring is similar to the solid wood flooring and the solid wood flooring. This wear resistance sequence is relative, because it is related to the surface material.

1. Reinforced composite flooring: The main advantage of wear resistance is that the surface of the floor has a layer of highly wear-resistant aluminum oxide covered on it. The national standards for strengthening floor eligibility are:

1 The family uses more than 6,000 revolutions of wear resistance;

2 The abrasion resistance in public places or commercial use is more than 9000 revolutions (8). Therefore, with the protection of the aluminum oxide wear layer, the laminate flooring is the most durable and durable.

2. Cork flooring: Among all floorings, cork flooring is a special kind of floor, because its base material is oak bark. Due to the special bubble cell structure of the oak bark, its abrasion resistance is similar to that of a reinforced floor. But it is related to the material on the surface.

3. The abrasion resistance of bamboo flooring, solid wood flooring, and solid wood flooring is related to the paint on the surface; there are two types of paint used in the market today:

1 Add anti-wear agent ingredients to the paint;

2 ordinary paint no wear agent;

The surface of the floor is a floor with anti-wear agent, and the wear resistance is more than ten times higher than that of ordinary floor paint. The relevant person once did the experiment: Using the method of testing and strengthening the composite floor, two kinds of solid wood floors with wear-resistant paint and non-wear-resistant paint surface were tested. As a result, it was found that the number of wear-resistant rotations of solid wood flooring was over 2,500. The state has different detection methods for bamboo flooring, solid wood flooring, and solid wood composite flooring and laminate flooring. The detection methods of these three types of floor: Calculated based on the abrasion value per 100 rotations of the floor surface; For every 100 rotations, the wear value equal to less than 0.08 grams for the top floor is excellent. The bamboo flooring board and the solid wood flooring are excellent. Goods and first-class goods, equal to less than 0.10 grams of solid wood flooring for the first grade, equal to less than 0.15 grams of solid wood flooring, parquet, bamboo flooring for qualified products.

4. Summary: The degree of wear of various floors is related to the material on the surface.

Nature floor del floor paint

RADIATA PINE BOARD

Our radiation pine board has a smooth surface and clear texture. Strong load-bearing capacity, manufacturers have an advantage in direct selling prices.

RADIATA PINE BOARD for closets,Maple Fancy Furniture Plywood,9mm Marine Fancy Plywood,Wardrobe Fancy Plywood

Linyi Lanshan Weipu Rubber Factory , https://www.weipuwood.com