In daily life, cabinets are used more frequently than furniture. Consumers who purchase the whole cabinet reflect that the countertops are easily exposed to stains and oils, and how to properly use and maintain the countertops in this situation. The key to the whole cabinet is on the countertop. There are many types of countertops, such as artificial stone countertops, quartz countertops, refractory countertops, marble countertops, etc. Jiexi cabinet experts said that the countertop maintenance is not so difficult, as long as they understand the characteristics and advantages and disadvantages of various countertops. Then the countertops are easy to maintain, and only the correct use and maintenance of the countertops can extend the life of the cabinets. The following is a detailed analysis of the various countertop materials that we are using extensively by Jesse cabinet experts. I hope that you will be more likely to make the decision to maintain the countertops after reading.

â—† artificial stone cabinet countertops. Artificial stone is currently a very popular countertop. Seamless artificial stone countertops are the most widely used materials in the current cabinets.

Advantages: Artificial stone is more wear-resistant, acid-resistant, high-temperature resistant, and has strong functions such as impact resistance, compression resistance, flexural resistance and penetration resistance. Because there is no pore on the surface, oil stains and water stains are not easy to penetrate into it, so the anti-fouling force is strong; the joint can be seamlessly bonded at any length, and the adhesive of the same material is used to polish the two pieces and be integrated.

Disadvantages: the hardness is slightly worse and the quartz stone, such as a rough object rubbing on the table surface, easily destroys the brightness of the table top. The artificial stone cabinet countertop has a high temperature resistance of 120 degrees, but it is not allowed to contact the overheated objects for a long time.

Maintenance: Artificial stone countertops should prevent the bleaching agent and scale in the water from making the table surface lighter and affecting the appearance. In actual use, avoid direct contact with hot objects. Due to the different processing techniques, the quality is also divided into three or six. Therefore, in the choice, we must pick a brand with good reputation and guaranteed service.

Cleaning: Because there is no fine lines, it has strong resistance to paints, stains, etc. It is also convenient to clean. However, the texture is soft and you should not use abrasive cleaners.

â—† Quartz stone countertops. Quartz stone cabinet countertops have better hardness and wear resistance than artificial stone cabinet countertops, and have better heat resistance, but they are definitely not so powerful. Whether it is artificial stone or quartz stone, hot pot can not be placed directly on the countertop, hot Expansion and contraction will lead to local molecular structural changes. Whether it is quartz stone or artificial stone, if you do not use the pot mat, place high-temperature objects directly on the counter surface of the cabinet. The surface of the high-temperature object will be different from the bright parts of other countertops.

Advantages: Quartz stone is a new type of stone synthesized by more than 90% quartz crystal plus resin and other trace elements. Its main material is quartz, which is another affordable and durable countertop material after artificial stone.

Disadvantages: single shape, can not do complex modeling, problems and bumps are not easy to repair. Because of the high hardness and high density of quartz, it cannot be seamlessly spliced ​​and it is not easy to make complex shapes. The price of artificial stone is slightly higher.

Maintenance: The pot that has just finished cooking, the thermal expansion and contraction will lead to molecular changes in the material, and the time will be long, which will cause the surface of the table to yellow and lose its luster or crack. It is best to place a small pot mat or shelf on the countertop to prevent the overheated bottom of the pot from directly contacting the countertop. Allow to cool for a few minutes before placing the hot pot. Usually pay attention to regular waxing, which can effectively extend the life and appearance of the countertop.

Cleaning: The liquid substance used for daily use does not penetrate into the interior. The liquid that has been placed on the surface for a long time can be wiped off with a rag by using a clean water or a clean and clean detergent. If necessary, the surface can be scraped off with a blade.

â—† Marble counter tops. When cleaning marble countertops, a neutral detergent should be used to prevent the cleaning agent from eroding the countertop. During maintenance, the surface of the marble material has pores and easy to accumulate oil stains. The pores of the stone can be sealed with a osmotic protective agent to prevent the entry of contaminants, and then the surface type protective agent is used to protect the color of the table top.

◆ Stainless steel cabinet countertops. For its easy oxidation characteristics, it is necessary to pay attention to the use of neutral detergent cleaning and less contact with alkaline substances. When various acids or bleaches are attached, rinse immediately with water and then with a neutral detergent. If it cannot be removed after scratching, do not scrub with a steel ball.  

High Speed Door Accessories

About high speed Door Accessories:

1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box

2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light

For some main accessories, here is detain introduction:

1).24G radar sensor:

Brand: Hofic

Technology: Microwave processor

Maintain time: 0.5s

Protection: IP54

Transmitting frequency: 24.125GHz

Maximum installation height: <5meter

Transmitting power density: <5mw/cm2

Power consumption: <1W(VA)

Installation angle: 0-90°(lengthways) -30-30°(crosswise)

Supply voltage: AC&DC 12V-30V

2).Photocell:

Approval CE & ISO9001

Power supply AC/DC 12-30V

Static current 25A

Action current 40mA

Mounting distance Max 10m

NO or NC contact Done by NO./NC. contact selection

Working environment temperature -42℃ to +45℃

Working environment humidity 10 to 90%RH

Appearance dimensions( controller) 123*50*32mm(L*W*H)

Appearance dimensions(Magic eye head) 19*13mm(L*D)

3). Remote control

Operating Voltage: AC220V/50HZ+-20%

Transmit power:≤100mW;Super regenerative module, strong anti-interference

Operating temperature:-30℃-+70℃

Working frequency: 433MHZ;transmitter 1527, millions of encoding chip

Accept sensitivity:≤110dB

Manipulation method: electric remote control

Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip

Configure the function: Up, down, stop, anti-lock full-featured reproduction

4). Magnetic loop

Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V

Power: <2VA

Continued electrical output: 7A / 250V AC

Frequency range: 20 to 200K Hz

Response time: infinity (factory setting) or adjust maintain time

Sensitivity: 0.01% to 0.1% divided into 3 levels

Protection level: IP30

Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2

Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH

Operating temperature: -25 ℃ to 70 ℃

Storage temperature: -40 ℃ to 85 ℃

Relative humidity: <90% non-condensing

Temperature compensation: automatic compensation up to 50 ℃ / h

Connection type: 11 pin DIN rail socket

Dimensions: 41 * 78 * 85 mm (width * height * length)

Weight: 250 grams

5). manual push button

This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.

Door Exit Button Push To Exit Switch Door Opener For Access Control Security

Main Feature

Fashionable appearance

Made of ABS Plastic

Easy to install and operate

Used for access control

Specification

Mechanical Life: 500,000 test

Material: Plastic

6). Limit switch encoder

Voltage: DC5V-24V

Output voltage: high voltage≥85%Vcc, low voltage≤0.5V

Maximum mechanical speed:6000rpm

Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.

Current consumption:≤30mA

Response frequency: 0-100KHZ

Protection: waterproof,oil proof,dust prevention, IP54

The output code system: binary code

Operating life: MTBF≥30000(+25℃,2000rpm)

Rotational inertia:4.0x10-8kgm²

Maximum load:radial direction20N

Axial direction:10N

Weight: about 0.4kg

High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.pvchighspeeddoor.com