The installation of the cabinet baseboard is performed after the kitchen floor and the ceiling installation are completed. Generally, the entire cabinet needs 15-30 days to be delivered to the door after being customized, and the installation can be completed within one day. Then, what are the steps for the installation of cabinets and skirting boards? What should you watch out for when installing cabinets and skirting boards? Let's study together with Xiaobian!

Cabinet footboard installation steps which

1. Preparation before installation: The main tools are ready to use, including electric stoves, pliers, drills and screwdrivers, and other installation tools.

2. Stretching line: The bounce line should be completed by two people, starting from the two ends of the bottom of the cabinet, straightening first, and then directly playing a good line, so that the horizontal line of the installation can be determined so that the installation of the baseboard can be guaranteed. Horizontal line position. In addition, the height is also the same, just pop up the same height.

3. Drilling holes and wood wedges: Holes are drilled at the horizontal position before installation. The drilling tool is operated with an electric drill, and the diameter of the hole is about 10 mm and the depth is 30 mm.

4. Immediately afterwards, we must apply the adhesive to the wooden wedge, and then we can flatten the wooden wedge with the wall.

5. Curved Yin and Yang corner baseboards: In the bending of the Yin and Yang corner baseboards, the yin and yang corners are first used to make baseboard moulds. The size of the moulds must be sized according to the size.

6. Cleaning before installation: Next, clean the surface of the floor and the cabinet, so that the installation is more docile and there is no gap.

7. Punch: Punching is very much in need of technology. According to experience, the distance between the holes cannot be different from Taiyuan, otherwise it will be difficult to restrict and it will have a bad influence on the later period.

8. Corner treatment: The baseboards where the corners meet need to be cut at an angle of 45 degrees on both sides so that the two baseboards that meet each other can be integrated with each other to form a relatively sharp 90 degrees.

Install cabinet cupboards to pay attention to what

1. First, pay attention to planning the position of the cabinet, and then perform the gap treatment of the wall so that when the furniture is installed, you can avoid the problem of being unable to wall.

2. If there is no line, it is recommended to use a solid cabinet baseboard material. The material of the cabinet baseboard is very large, such as wood, stainless steel, PVC, etc. Solid cabinetry baseboard material is more expensive, but in addition to durability considerations, it is necessary to consider the insect ants erosion.

Xiao Bian summary: What are the steps for installing cabinets and skirting boards? What should you watch out for when installing cabinets and skirting boards? The cabinet skirting board installation procedures are described in detail and provided for your reference. With regard to matters needing attention, as long as the installation is more careful, more attention to some of the installation of knowledge, so that you can avoid these problems. Finally, the above content hopes to help everyone.

Wear-resistant Casting Ball

Wear-resistant Steel Ball is a kind of high quality abrasive material, widely used in mining, cement, electric power and other industries of ball mill equipment. Advantages of steel ball:

1. Material: Steel ball made of high quality alloy steel material, with high hardness and wear resistance, can withstand high strength wear.

2. Diameter: The diameter of the steel ball is the standard size, and different diameters of the steel ball can be customized according to customer needs.

3. Surface hardness: After heat treatment, the surface hardness of the steel ball reaches HRC55-65, which can maintain stable performance in high-speed friction and wear environment.

4. Tensile strength: The steel ball has high tensile strength, can withstand the impact and pressure of high strength, and is not easy to deformation or fracture.

5. Scope of use: Steel balls are widely used in ball mill equipment, which can be used in ore grinding, cement grinding, electric pulverized coal grinding and other processes.

6. Advantages: The steel ball has excellent performance, which can improve the production efficiency and energy consumption of the ball mill equipment, reduce maintenance costs, and improve product quality.

7. Packaging: Steel balls are usually packed in plastic bags or cartons to protect the integrity of the steel balls and prevent damage during transportation.

8. Wear resistance: The steel ball has excellent wear resistance, which can maintain a stable wear rate in long-term use and extend the service life of the equipment.

In short, wear-resistant steel ball is a high-quality abrasive material, with excellent wear resistance and tensile strength, suitable for a variety of ball mill equipment, can improve production efficiency and product quality.

Wear-Resistant Casting Ball,Alloy Steel Balls,Cast Steel Parts,Steel Balls For Ball Mills

Xuzhou Surun wear-resistant material Co., LTD , https://www.suruntools.com