1 Screen cover: welded by the feeding port and the cone cap, the bottom end of the cone cap is equipped with a V-shaped sealing ring, and the rotating vibrating screen cover and the screen frame are locked with a locking belt;

2 Screen frame: The vibrating screen frame is welded by steel plate (steel plate, stainless steel plate) and then welded. There is a receiving ring at the upper and lower ends of the screen frame, and a flange ring is arranged inside the lower end for fixing the screen, the pressing ring, the rubber ball plate and the rubber ball plate with two raised steel plate circles. The pallet is divided into three layers of inner and outer layers. The pallet is drilled with small holes, and a rubber ball is arranged between the screen and the rubber ball holder. During the vibration process, the rubber ball hits the screen to prevent the screen from being clogged. The mesh ring, screen, rubber ball holder and funnel are fastened with the Bolts, nuts and washers to the screen frame flange.

3 Vibration source: The vibration source of the vibrating screen has a vibration motor or an ordinary motor to drive the exciter. The vibration motor/vibrator fixed the large plate and the base are connected by a shock absorbing spring;

4 Vibration isolation spring: The vibration isolation spring is composed of upper and lower spring positioning ring and spring. It is installed along the circumference of the large disk: 12-20 vibration isolation springs.

5 Base: The base of the vibrating screen is rolled by steel plate, one flange on each side, the lower positioning ring of the vibration isolation spring is installed on the upper part, the anchor bolt hole is fixed on the lower part, and the inspection door is opened on the base cylinder wall. In order to adjust the space angle of the upper and lower weights of the vibration motor, and the like.

Concerned about surprises

Label: Analysis of the assembly of the rotating vibrating screen

Previous: The six working principles of solenoid valve manufacturers to get the daily dimension Next: What are the factors that affect the efficiency of cyclone dust collector?

Brass Nut

Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing.

Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass bolts also require a pilot hole be driven before installtion.

Brass Nut,Adjustable Brass Nut,Brass Strat Nut,Brass Cap Nut

Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com