In the actual application situation, the ultrasonic level gauge will often have a fault. When the fault occurs, the user should know how to eliminate it. This article describes the Jiangsu Zhongneng Instrument.
10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Advantage analysis of small launch angle of ultrasonic level gauge Release time: 2013-12-9 7:50:02
In the actual application, the ultrasonic level gauge will often have a fault. When the fault occurs, the user must know how to eliminate it. The working principle of the ultrasonic level meter is that the ultrasonic transducer (probe) emits high-frequency pulse sound waves. The surface of the measured material (material) is reflected back to the reflected echo. The echo is received by the transducer and converted into an electrical signal. The multi-pulse low-voltage multi-point emission transmitting circuit of the ultrasonic level meter, double-balanced noise-reducing multi-point receiving circuit (QF- 9000 series): Improve the reliability of the instrument, solve the problem of inaccurate measurement of non-level unevenness, and greatly enhance the anti-interference ability. It can work stably near the substation tower. Advanced detection technology, rich software functions to adapt to various complexities Environment. The suppression function with interference echo ensures the authenticity of the measured data. Automatic power adjustment \ gain control \ temperature compensation. The sensor is made of PTFE material and can be used in various corrosive applications. Using new waveform calculation technology to improve the instrument measurement accuracy.
When the ultrasonic level meter is used, when the fault indicator light is always on, it may be a problem of installation. In addition, another distinctive feature is that the ultrasonic wave is emitted in addition to the flat head. If the zero position is continuous, the metal bracket is used for the mounting part. The ultrasonic level gauge will recognize that the signal strength of the bracket part is greater than the signal strength received by the plane head. The metal bracket part is in the dead zone distance from the transmitted wave. Therefore, the ultrasonic wave is in the protection state, the fault light is always on, and the output is 22MA. The solution is to use a non-metallic bracket. Because the non-metallic bracket is used, the transmitted wave at the thread can penetrate, and the echo signal of the zero liquid level will definitely It is larger than the echo signal at the thread. After debugging and reprogramming, the top fault light is always on, and the output current is 22MA. This fault condition occurs, after actual verification, it is still in the process of programming and debugging, it fails to follow the instructions. The resulting program is disordered and self-protected. The customer is programming the ultrasonic level timer, failing to wait until the indicator light flashes normally, or the programming method step is not at all. In the unstable programming and debugging. If the programming is not repeated according to the requirements, the ultrasonic level gauge will refuse to work and protect itself. The solution to this fault is to reset the ultrasonic level gauge as required. Programming. If the program is reprogrammed multiple times without reset, the above fault will occur.
When the ultrasonic wave continues to zero level, the top light is on, and the output current is 22MA. When the liquid level is restored after a period of time, the fault cannot be automatically cancelled, and it needs to be turned off after the power is turned off, which brings unnecessary trouble or even loss to the customer. The highly cost-effective product of the level gauge can truly solve the customer's requirements for automatic detection and control of liquid level, and maximize cost savings.
Zhongneng Instrument Expert also tells the accident when the user encounters the blue fault light on the top of the ultrasonic level gauge. To solve the problem that the fault light is always bright, the design of the ultrasonic level gauge must be understood. The ultrasonic level gauge is 0 degree emission. Angle is the smallest angle of global emission. The advantage of small launch angle is that it can gather energy well, and it has better penetration for foam, steam, mild dust, etc. It can be directly applied to narrow occasions, thus improving Applicability and accuracy of the product. When no echo is received and the internal software is faulty, the top blue indicator light is always on.
Orifice flowmeter http://
Magnetic flap level gauge http://
Input level transmitter http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun
Mini Glue Gun
10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com